Hahnvapor Logo

 

HAHNVAPOR HS-3005N(CE) /  HS-3005 Cooling Water Circulator

3005 01FEATURE
As a source of cooling water to the Rotary Evaporator and as a heat-emitting equipment it supplies sufficient quantity of cooling water as highly efficient chemical pumps are installed and does not contaminate other instruments as it does not get corroded.

SPECIFICATION

Capacity 15ℓ
Bath Dimension (D×H) φ280×270
Circulator Pump Magnet 20W Max. flow 15ℓ/min
Temp.Range Down to~ -20°C
Controller FND Controller
Refrigerator 3/4HP
Refrigerant 134A
Dimension (W×D×H) 350×390×840mm
Gross weight 40㎏
Power consumption 920W
Power Supply AC 230V 50/60Hz

 

HAHNVAPOR HS-3003 Cold Trap Bath

3003 01SPECIFICATION
- Capacity : 4ℓ
- Bath Dimension(D×H) : φ190×200
- Type : Glass Trap
- Temp.Range : Down to~ -40°C
- Controller : FND Controller
- Refrigerator : 1/3HP
- Refrigerant : 134A
- Dimension(W×D×H) : 250×510×510mm
- Gross weight : 28kg
- Power consumption : 334W
- Power Supply : AC 230V 50/60Hz
APPLICATION
- When cold trap needs to be done in extremely low temperature.
- Solvent vapor trap to prevent contamination of vacuum pump by
  lubricating oil.
- Quick freezing of sample for freeze-drying.
- Quick freezing for reaction stop of enzyme.

 

HAHNVAPOR HS-0312 Solvent Recycling System with Vacuum Pump

0312 01

Main Features
HS-0312 is a highly efficient cooler. HS-0312 has a collector of wastewater which is easily assembled or disassembled from the main body.
- The lower cooler temperature, users can expect, the higher receiving rate of solution.
- Users can easily and instantaneously control vapor temperature of the main body. Such controls are carried out by setting 10 different representative vacuum pressure for different solutions.
- A diaphragm vacuum pump is attached.
- HS-0312 is efficient stand alone equipment which has a highly efficiently cooler, a collector of wastewater, diaphragm pump, and vacuum pressure assembled altogether as one machine.
- The recommended usage of this unit is a waste collection. The unit starts work if a hose and main power are connected properly.

SPECIFICATION

Product type Solvent Recycling System with Vacuum Pump
Model number HS-0312
Solution collection type Vacuum controller+ Trap+ Condenser
Performance Pressure measurement range 0~760mmHg (0~1013h/Pa/mbar)
Pressure setting range 0~760mmHg (0~1013hPa/mbar),
구배제어 : 1~700mmHg (1~933hPa/mbar)
Control mode Two types of control modes : The parameter setting mode and the continous setting mode
Function Display FND disply
Pipe material Glass, PP, PTFE, Viton
Material types Receiving container Receiving flask 1000ml, wastewater trap :1000㎖
Size Connecting nozzle External diameter 10mm (piping, leak, cooler, ventilation purpose )
Connecting pump Diaphragm vacuum pump
Recommend temperature for usage 5~35℃
Size (mm) 450*240*450
Delivery pressure 730mmHg (970mbar)
Pumping principle 2-stage diaphragm pump
Weight (kg) 19.2
Rated Power 0.5A. 220~230V, 50~60Hz

 

HAHNVAPOR VACUUM PUMPS

 

Diaphram Pump For Air, Gases and Vapors

0153 01
Technical features
- 100% oil-free transfer
- Pure transfer, evacuation and compression
- Highly compatible with vapors and condensation
- Chemically-resistant
- Therefore suitable for highly aggressive and corrosive gases or vapors
- Maintenance-free
- Environmentally friendly

Technical data

Delivery(l/min)1

20

Ultimate vacuum (mmHg)

750

Connectors for tube (mm)

OD 10

Voltage / Frequency

230V/50Hz

Power P1

120W

Operating current

0.5A

Weight

9.3kg
Dimensions(LⅩHⅩW)mm 270/180/220
Material PTFE or PE
 

Electric Aspirator HS-3000 

3000 01FEATURE
- Excessive consumption of water may be reduced that can happen when city piped water is used.
- Utilizing water pressure gained by motor pump, two aspirators can be installed.
- By preventing reflux of air, vacuum, filtering and vacuum distillation are possible.
- Applicable to Rotary vacuum evaporator.
- A cooling coil could be installed to prevent the loss of vacuum effect in the case when the water temperature increases (option).
- Vacuum controller could be equipped for checking degree of vacuum status during the operation(option).
- Bath is made of polypropylene which is strong and lasts long.

SPECIFICATION
- Pump Capacity : 18ℓ/min×2EA
- Bath Capacity : 8ℓ
- Motor Power : 150W
- Material of Bath : Polypropylene
- Material of Aspirator : Metal 2 pcs
- Safety : Fuse
- Power source : AC 220V 50/60Hz 0.7A
- Dimension(W×D×H) : 320×240×350mm
- Weight : 6kg

 

Vacuum Pump

3004 01SPECIFICATION
- Pump Speed : 100 ℓ/ min
- Ultimate Pressure Torr(Pa) : 5×10-4(6.7×10-2 )
- Full Load Power : 0.4kw
- Motor Speed : 1700 RPM
- Oil Capacity : 500 ㎖
- Ambient Operation Temp. Range : 7~40℃
- Overall Dimensions(W×D×H) : 150×392×250㎜
- Power Source : AC 220V 50/60Hz 2A
- Weight : 19 kg

 

HAHNVAPOR Vacuum Controller

0245 01SPECIFICATION
- Solid state module maintains precise control (±3%) of the system vacuum by cycling the pump on/off as required.
- Adjustable for any level between 1mmHg and 760mmHg
- Power source : AC 220V 50/60Hz
- Dimensions(W×D×H) : 160×130×95mm
- Weight : 1.8kg 

 SPECIFICATION

Product type Solvent Recycling System with Vacuum Pump
Model number HS-0312
Solution collection type Vacuum controller+ Trap+ Condenser
Performance Pressure measurement range 0~760mmHg (0~1013h/Pa/mbar)
Pressure setting range 0~760mmHg (0~1013hPa/mbar),
구배제어 : 1~700mmHg (1~933hPa/mbar)
Control mode Two types of control modes : The parameter setting mode and the continous setting mode
Function Display FND disply
Pipe material Glass, PP, PTFE, Viton
Material types Receiving container Receiving flask 1000ml, wastewater trap :1000㎖
Size Connecting nozzle External diameter 10mm (piping, leak, cooler, ventilation purpose )
Connecting pump Diaphragm vacuum pump
Recommend temperature for usage 5~35℃
Size (mm) 450*240*450
Delivery pressure 730mmHg (970mbar)
Pumping principle 2-stage diaphragm pump
Weight (kg) 19.2
Rated Power 0.5A. 220~230V, 50~60Hz

Menu