Direct-Pure® RO 20 Pure Water System
Direct-Pure® RO 20 Lab water system produces recerse osmosis(RO) water directly from tap water.Features
I. Electrical and water compartments are completely segregated, thus safer to operate.
II. The Fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life detection
as well as many other functions.
III. The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
IV. User can set water dispensing time for easy water collection.
V. The system is equipped with a 30-liter PE tank (upgradeable to a 60-liter) with a liquid level sensor.
VI. RephiLe can provide full document support to meet user’s GMP, GLP, FDA and other certification requirements.
Main Applications
Pure water can be used in many areas. Here are some typical applications.
• Manual cleaning and glassware rinsing
• Buffer preparation
• Glassware washers
• Humidifiers
• Water baths
• Aging tester
• Autoclave
• Laboratory animal feed
• Feed water for ultrapure water systems
Specifications
|
|
|
Direct-Pure RO System |
|
|
Feed water Requirements |
|
|
Tap Water * |
TDS <1000 ppm (2000 µS/cm) |
|
Water Temperature |
5～45 ℃ |
|
Water Pressure |
15～60 psi (1-4 bar) |
|
Product Water Flow Rate |
Typical 20 L/h (at 25℃) |
|
RO Rejection Rate |
|
|
Monovalent ions removal |
> 95% |
|
Polyvalent ions removal |
> 99% |
|
Bacteria and Particles removal |
> 99% |
|
Organics and Pyrogens removal |
> 99% |
|
Dimensions |
|
|
Length x Depth x Height |
30 cm x 49 cm x 48 cm |
|
Net Weight |
18 kg |
* If water hardness is greater than 1000 ppm, RephiLe suggest using an additional water softening device
to protect the RO membrane in your system.
Ordering Information
|
Description |
Catalogue No. |
|
Direct-Pure RO 20 Pure Water System |
RD0R02000 |
|
Consumables |
Catalogue No. |
|
RO membrane for Direct-Pure RO 20 System, 1/PK |
RAR010001*2 |
|
Polypropylene Depth Filter, 10 Inches 1 µm, 12/PK |
LABPA0112 |
|
Polypropylene Depth Filter, 10 Inches 10 µm, 12/PK |
LABPA1012 |
|
Activated Carbon Cartridge, 10 Inches, 12/Pk |
LABAC1012 |
|
Softening Cartridge, 10 Inches, 12/Pk |
LABAT1012 |
|
Tank Vent Filter |
RATANKVN1 |
|
30-liter PE tank |
RATANK030 |
|
60-liter PE tank |
RATANK060 |
Back to EDI & RO water systems pain page